《電子技術應用》
您所在的位置:首頁 > 通信與網絡 > 解決方案 > Melexis MLX90132汽車NFC-RFID無線接入控制方案

Melexis MLX90132汽車NFC-RFID無線接入控制方案

2011-12-30

Melexis公司的MLX90132是13.56MHz全集成的多協議NFC/RFID收發器,可處理亞載波頻率106kHz到848kHz,波特速率高達848kbps.雙路驅動器架構把外接元件數降到最少,能向合適的天線負載提供高達70mW RF功率,和ISO/IEC 18092 (NFC), ISO/IEC 14443 A1與B2, ISO/IEC 15693以及ISO/IEC 18000-3 模式1兼容.主要用在汽車接入和起動, 汽車發動機防盜,汽車診斷和汽車租賃.本文介紹了MLX90132主要特性和優勢, 簡化方框圖, 典型應用電路, 外接天線網絡和天線電路框圖和并聯接收的天線電路框圖.

The MLX90132 is a 13.56MHz, fully integrated, multi-protocol RFID/NFC transceiver IC. It has been designed to handle sub-carrier frequencies from 106 to 848 kHz and baud rates up to 848kbit/s.

The dual driver architecture of the MLX90132 requires minimal external support components and allows the transmitter to provide up to 70 milliwatts RF power to an appropriate antenna load. This delivered power is suitable for most short to mid range applications.

The MLX90132 embeds tag emulation functionality for NFC support. Enhanced tag and field detection capabilities provide significant power consumption reduction in RFID reader configuration and in NFC mode.

The digital section of the MLX90132 handles the low protocol layers from API to physical layer using advanced bit and frame decoding functions.

It contains a digital demodulator based on subcarrier detection and a programmable bit/symbol encoder/decoder. It also encodes and decodes the start and stop bits, parity bits, extra guard time (EGT), start and end of frame (SOF/EOF) and CRC.

Its 256 bytes buffer allows buffering of an entire RFID frame. The SPI/UART communication ports guarantee easy interface with the majority of microcontrollers, especially the low cost ones.

MLX90132主要特性和優勢:

_ Conforms with ISO/IEC 18092 (NFC)

_ Conforms with ISO/IEC 14443 A1 and B2,

_ Conforms with ISO/IEC 15693

_ Conforms with ISO/IEC 18000-3 mode 1

_ Standard SPI interface with 256 Bytes Buffer

_ High speed communication (848kbit/s)

_ Embedded RF field and TAG detectors

MLX90132應用:

• Car access and start

• Personalization of car settings

• Car diagnostics

• Car lent

圖1,。MLX90132簡化方框圖

圖2,。MLX90132典型應用電路

圖3,。MLX90132外接天線網絡

圖4,。MLX90130/32天線電路框圖

圖5,。MLX90130/32天線電路框圖(并聯接收電路)

圖6.NFC閱讀器在汽車中應用

圖7. 汽車NFC/RFID無線接入控制示例

詳情請見:
http://www.melexis.com/Assets/MLX90132-datasheet-6058.aspx



本站內容除特別聲明的原創文章之外,,轉載內容只為傳遞更多信息,,并不代表本網站贊同其觀點。轉載的所有的文章,、圖片,、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者,。如涉及作品內容,、版權和其它問題,請及時通過電子郵件或電話通知我們,,以便迅速采取適當措施,,避免給雙方造成不必要的經濟損失。聯系電話:010-82306118,;郵箱:[email protected],。