《電子技術應用》
您所在的位置:首頁 > 模擬設計 > 解決方案 > StellamarXilinxXC3S400AN數字ADC音頻評估方案

StellamarXilinxXC3S400AN數字ADC音頻評估方案

2012-03-08
作者:Stellamar 公司

Stellamar 公司的數字ADC采用Xilinx公司的 XC3S400AN FPGA,平均功耗低50%,面積低50%,非常低的工作電壓,高達14位的有效位,14位500Hz的SNR為90dB,數字典輸出,數字測試,過采樣,不會丟失碼,極低的失調漂移,能用在苛刻的環境.目標應用在語音,消費類和工業中的傳感器,低功率手提設備以及軍事,空間和航空航天.本文介紹了數字ADC主要特性,數字ADC音頻評估板框架圖,電路圖和材料清單.
 
The Digital ADC is a digital core which provides analog functionality with all the benefits of a digital design process: shorter design cycles, lower risk, established design and layout tools, digital test methodology, and portability across process technologies.

The design is implemented with a small number of digital gates and only an LVDS input cell, a digital output cell and a handful of passive external components

The ADC provides up to 12 effective bits and up to 15 kHz of bandwidth making it ideal fit for both low frequency sensors and high-quality voice.

The benefits of the digital implementation include low voltage and low power process technologies where it excels in portable applications.

Alternative digital process technologies enable the Digital ADC to be used in high reliability and radiation hard environments where analog implementations are problematic.

數字ADC主要特性:

? On average 50% less power1

? On average 68% smaller area1

? Very low supply voltages

? Up to 14 effective bits

? Bandwidth

o 14 bits, 500 Hz with SNR 90 dB

o 12 bits, 4 kHz with SNR 72 dB

o 12 bits, 15 kHz with SNR 68 dB

? Process Technology Independent

? Digital Layout

? Digital Testing

? Oversampling

? No missing codes

? Extremely low offset drift

? Suitable for Rad-Hard environments

數字ADC目標應用:

? Voice

? Sensors (Consumer and Industrial)

? Low Power portable

? Military, Space and Avionics

數字ADC音頻評估板

Digital ADC Audio Evaluation Board

The Stellamar Digital ADC audio evaluation board provides a platform that contains two separate implementations of the Digital ADC targeted at audio applications. The ADC implementation is selected by switch 1 in SW1.

0) 11-bit ADC with a 5 kHz bandwidth. This ADC may be used for voice signals where higher frequency signals are not required, enabling a smaller digital design.

1) 10-bit ADC with a 20 kHz bandwidth. This ADC provides a higher bandwidth that is suitable for musical signals, but has a larger digital design.


圖1.數字ADC音頻評估板外形圖


圖2.數字ADC音頻評估板方框圖

圖3.數字ADC音頻評估板電路圖(1)

圖4.數字ADC音頻評估板電路圖(2)
數字ADC音頻評估板材料清單:

詳情請見:
http://www.stellamar.com/docs/Audio_EVB_User_Guide.pdf



本站內容除特別聲明的原創文章之外,,轉載內容只為傳遞更多信息,,并不代表本網站贊同其觀點。轉載的所有的文章,、圖片,、音/視頻文件等資料的版權歸版權所有權人所有,。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容,、版權和其它問題,,請及時通過電子郵件或電話通知我們,以便迅速采取適當措施,,避免給雙方造成不必要的經濟損失,。聯系電話:010-82306118;郵箱:[email protected]