中圖分類號： TN919 文獻標識碼： A DOI：10.16157/j.issn.0258-7998.200612 中文引用格式： 李晉濤,，任勇峰，楊志文,，等. 基于SATA3.0的存儲系統優化設計[J].電子技術應用,，2021，47(1)：86-90. 英文引用格式： Li Jintao,，Ren Yongfeng,，Yang Zhiwen，et al. An optimized design of a storage system based on SATA3.0[J]. Application of Electronic Technique,，2021,，47(1)：86-90.
An optimized design of a storage system based on SATA3.0
Li Jintao1，Ren Yongfeng1,，2,，Yang Zhiwen1，Li Huijing1
1.State Key Laboratory of Electronic Tecchnology,，North University of China,，Taiyuan 030051，China,； 2.Key Laboratory of Instrument Science and Dynamic Testing(Ministry of Education) North University of China,，Taiyuan 030051，China
Abstract： Aiming at the problem of real-time storage of high resolution, high frame frequency and large capacity image data obtained in telemetry test, as well as the problem of transmission stability, we optimized a storage system. This system takes 7 series FPGA as the control core, and stores the received large-capacity image into the solid state hard disk through SATA3.0 transmission bus. The state machine is optimized in the stored procedure to solve the problem of transmission interruption through the real-time marker monitoring.After the storage was completed, the data in the SSD will be read through the gigabit Ethernet to the computer for playback and analysis.Lots of reading and writing data were completed at room temperature and -40 ℃ and +60 ℃. The results show that the optimized storage system can achieve high speed and long time stable storage and has a good reference value in large capacity storage.
Key words : SATA3.0,；solid state disk,；OOB；bulk storage
