《電子技術應用》
您所在的位置:首頁 > 模擬設計 > 解決方案 > MaximMAX2991動力線通信模擬前端解決方案

MaximMAX2991動力線通信模擬前端解決方案

2011-10-17
作者:Maxim 公司

Maxim 公司的MAX2991是動力線通信(PLC)模擬前端收發器,具有優異的性能和降低系統成本.MAX2991采用OFDM信號在動力線上進行傳輸,工作頻率10kHz到490kHz,可編程濾波器和 CENELEC, FCC,ARIB標準兼容.單電源3.3V工作,主要用在自動讀表(AMR),家庭自動化,HVAC" title="HVAC">HVAC,建筑物自動化,工廠自動化" title="工廠自動化">工廠自動化,照明控制,傳感器控制和數據采集(SCADA),遙測和遙控.本文介紹了MAX2991主要特性,方框圖,典型應用框圖和MAX2990/MAX2991評估板主要特性以及智能電網解決方案相關框圖.

The MAX2991 power-line communication analog front-end (AFE) is a state-of-the-art integrated circuit that delivers high integration and superb performance, while reducing the total system cost. The MAX2991 is the first AFE specifically designed for OFDM (orthogonal frequency division multiplexing) modulated signal transmission over power lines. Operating in the 10kHz to 490kHz band, the programmable filters allow compliance with CENELEC, FCC, and ARIB standards using the same device.

The MAX2991 transceiver provides two main paths: transmit (Tx) path and receive (Rx) path. The transmit path injects an OFDM modulated signal into the AC or DC line. The transmit path is composed of a digital IIR filter, digital-to-analog converter (DAC), followed by a lowpass filter, and a preline driver. The receiver path is for the signal enhancement, filtering, and digitization of the received signal. The receiver is composed of a low­pass and a highpass filter, a two-stage automatic gain control (AGC), and an analog-to-digital converter (ADC). The integrated AGC maximizes the dynamic range of the signal up to 60dB, while the lowpass filter removes any out-of-band noise, and selects the desired frequency band. The ADC converts the enhanced and amplified input signal to a digital format. An integrated offset can­cellation loop minimizes the DC offset.

The MAX2991, along with the MAX2990 PLC baseband modem, delivers the most cost-effective data communi­cation solution over power-line networks in the market. The MAX2991 is specified over the -40NC to +85NC temperature range and is available in a 48-pin LQFP package.

MAX2991主要特性:

Optimized to Operate with the MAX2990 PLC Baseband

Integrated Band Select Filter, AGC, and 10-Bit ADC for Rx Path

Integrated Wave-Shaping Filter, Programmable Predriver Gain, and 10-Bit DAC for Tx Path

Variable Sampling Rate Up to 1.2Msps

Built-In 60dB Dynamic Range AGC and DC Offset Cancellation

Programmable Filters Operate in the CENELEC, FCC, and ARIB Frequency Bands

Single 3.3V Power Supply

70mA Typical Supply Current (Half-Duplex Mode)

Extended Operating Temperature Range

MAX2991應用:

Automatic Meter Reading

Home Automation

Heating Ventilation and Air Conditioning (HVAC)

Building Automation

Industrial Automation

Lighting Control

Sensor Control and Data Acquisition (SCADA)

Remote Monitoring and Control

Security Systems/Keyless Entry

Smart Grid

圖1.MAX2991功能方框圖

 圖2.MAX2991典型應用電路框圖

圖3.MAX2990和MAX2991方框圖

MAX2990/MAX2991評估板

The MAX2990 evaluation kit is a highly integrated chipset including the MAX2990 baseband (BB) and MAX2991 analog front end (AFE). This system transfers data over 120V or 240V AC powerlines, DC, or cold wire. The MAX2990 baseband uses an orthogonal frequency division multiplexing modulation (OFDM) technique that can be configured to operate in the 10kHz to 490kHz frequency band.

The MAX2990 evaluation kit contains two modems and the evaluation software. It is assembled and preconfigured to demonstrate performance under a variety of international regulatory requirements.

MAX2990/MAX2991評估板主要特性:

Optimized to Operate with the MAX2990 PLC Baseband

Integrated Band Select Filter, AGC, and 10-Bit ADC for Rx Path

Integrated Wave-Shaping Filter, Programmable Predriver Gain, and 10-Bit DAC for Tx Path

Variable Sampling Rate Up to 1.2Msps

Built-In 60dB Dynamic Range AGC and DC Offset Cancellation

Programmable Filters Operate in the CENELEC, FCC, and ARIB Frequency Bands

Single 3.3V Power Supply

70mA Typical Supply Current (Half-Duplex Mode)

Extended Operating Temperature Range           

MAX2990/MAX2991評估板應用:

Automatic Meter Reading

Building Automation

Heating Ventilation and Air Conditioning (HVAC)

Home Automation

Industrial Automation

Lighting Control

Remote Monitoring and Control

Security Systems/Keyless Entry

Sensor Control and Data Acquisition

Voice-Over-Powerline


圖4.智能電表" title="智能電表">智能電表解決方案框圖

圖4.71M6543F/71M6543H工商業用多相電表SoC方案框圖

圖5.71M6543F/71M6543H低成本提高精度和設計靈活性電表SoC方案框圖

圖6.電網監測系統解決方案框圖

圖7.wye配置三相功率監測應用案例框圖

圖8.Maxim提供的有線/無線和串行通信方案框圖


圖9.智能電網通信架構圖

圖10.78M6618功率和電能測量應用框圖
詳情請見:
http://datasheets.maxim-ic.com/en/ds/MAX2991.pdf

http://www.maxim-ic.com/solutions/guide/smart-grid/smart-grid-solutions-guide-book.pdf



本站內容除特別聲明的原創文章之外,,轉載內容只為傳遞更多信息,,并不代表本網站贊同其觀點,。轉載的所有的文章、圖片,、音/視頻文件等資料的版權歸版權所有權人所有,。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容,、版權和其它問題,,請及時通過電子郵件或電話通知我們,,以便迅速采取適當措施,避免給雙方造成不必要的經濟損失,。聯系電話:010-82306118,;郵箱:[email protected]