中圖分類號： TP23 文獻標識碼： A DOI：10.16157/j.issn.0258-7998.211990 中文引用格式： 王勻，王蓓蓓,，周祿華. 基于AIDC鏈路的多模式串口切換系統的設計與實現[J].電子技術應用,，2022，48(7)：86-90,，95. 英文引用格式： Wang Yun,，Wang Beibei，Zhou Luhua. Design and implementation of multi-mode serial switching system based on AIDC link[J]. Application of Electronic Technique,，2022,，48(7)：86-90，95.
Design and implementation of multi-mode serial switching system based on AIDC link
Wang Yun1,，2,，Wang Beibei1，2,，Zhou Luhua1,，2
1.Nanjing LES Information Techology Co.，Ltd.,，Nanjing 210014,，China； 2.The 28th Research Institute of China Electronics Technology Group Corporation,，Nanjing 210007,，China
Abstract： At present, the AIDC interconnection is based on the X.25 line between the civil aviation control units，and the physical line needs to be shared between main and standby automation systems. When the automation system state is switched, it is often necessary to manually switch cable connections.This increases switching time and increases the risk of failure. In this paper, a serial switcher design is proposed, so that the X.25 processing equipment of 2 sets of automation system can share a physical link by switching, and supports three switching modes. At present, the switcher prototype has been tested on the Beijing ACC test platform, and the rapid switching of physical links can be realized in the scenario of AIDC link switching of the automation systems.
Key words : ATC system,；main and standby switching,；AIDC
